Omron H5F User Manual

② Press the Key.The display will change
to the time of the next change in output status.
(Continue pressing the Key to display
the days and times for one week.)
③ If the Key is pressed with the last
setting for the week displayed, [end] is
displayed for 2 s and then the Time Switch
automatically returns to run mode.
The days and times at which output turns ON or OFF over the course of
one week can be displayed continuously in the actual order in which they
will occur.
≪Note≫
• Program check function can be entered from run mode only.
• Press the Key again to return to run mode before reaching the end of the
program check function display sequence.
• The [ ] and [ ] symbols displayed in test mode have no effect on the
present operation.
• Only ON times are displayed for pulse-output operation.
- 25 -
① Press the Key for 2 s min. in run mode
to start program check.The display will flash
[test] and the day and time of the next
change in output status will be displayed.
The color indicates flashing
In the above example,
output will turn ON at 1:15 pm
on Monday.
In the above example,
output will turn OFF at 5:30 pm
on Monday.
14. Program check function
TEST
TEST
WRITE
WRITE
WRITE
115
stte
PM
PW
530
stte
PM
PW
end
PW
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA

Omron H5F Specifications

General

Brand	Omron
Model	H5F
Category	Timer
Language	English