18
Set the monitor to the current date and time before taking a
measurement for the first time. If the date and time are not set
correctly, the measurement values stored in the memory and the
average values may not be correct.
The Blood Pressure Monitor automatically stores up to 84 individual
measurements values with the dates and times. The monitor also
calculates weekly averages for measurements in the morning and in
the evening. Morning and evening averages are stored for this week
and the last seven weeks.
The monitor can also calculate an average reading based on the three
most recent measurements taken within 10 minutes of the last reading.
NOTES: • If only two readings are stored in the memory for the
10-minute period, the average is based on the two readings.
• If one reading is stored in the memory for the 10-minute
period, this reading is displayed as the average.
1. TO START THE SETTING
Press and hold the SET button
to adjust the date and time.
The year flashes on the display.
SETTING THE DATE AND TIME
HEM-7080-updated Sept 22.qxd 9/22/06 3:46 PM Page 18
To Next Page
Loading...
Need help?
General
