Omron NB3Q-TW_B User Manual

8-5
8 Connecting to Panasonic Industrial Devices SUNX PLCs
NB-series Programmable Terminals Host Connection Manual (V108)
8-4 Supported Registers
8
8-4 Supported Registers
FP0-C16
FPX
Note 1 For X registers, if the address in PLC is X01,then the address in PT should be set to X0.1; and if the
address in PLC is X1F, then the address in PT should be set to X1.F and Y, R registers can be deduced
according to this rule.
2 The range of Actual Value Registers for Timer/Counter of the PT can be specified to 32767 at max, while
the NB series devices support to 9999 at max.
3 Address format description: D: decimal, O: octal, H: hexadecimal.
Device Bit Address Word Address Format Notes
External Output Nodes Y0.0-12.F --- DD.H
External Input Nodes X0.0-12.F --- DD.H
Timer Nodes T0-99 --- DD
Counter Nodes C100-143 --- DDD
Internal Auxiliary Nodes R0.0-62.F
R900.0-903.F
--- DD.H
DDD.H
Setting Value Registers
for Timer/Counter
--- SV0-143 DDD
Actual Value Registers for
Timer/Counter
--- EV0-143 DDD
Data Registers --- DT0-1659 DDDD
Device Bit Address Word Address Format Notes
External Input Nodes X0.0~109.F --- DDD.H
External Output Nodes Y0.0~109.F --- DDD.H
Timers T0~1007 --- DDDD
Counters C1008~1023 --- DDDD
Link Nodes L0.0~127.F --- DDD.H
Internal Nodes R0.0~255.F
R900.0~911.F
--- DDD.H
Actual Value Registers for
Timer/Counter
--- EV0-1023 DDDD
Setting Value Register for
Timer/Counter
--- SV0-1023 DDDD
Data Registers --- DT0-32764 DDDDD

Omron NB3Q-TW_B Specifications

General

Brand	Omron
Model	NB3Q-TW_B
Category	Touch terminals
Language	English