Omron NJ501 User Manual

9．Appendix Connection Using the “Project File”
9. Appendix Connection Using the “Project File”
This section describes the “project file” which contains the settings made in the following
sections: 7.3.2. Starting the Sysmac Studio and Setting the Parameters for the Controller,
7.3.3. Setting Global Variables and 7.3.6. Settings in the Watch Tab Page.
The setting procedure can be simplified by using the “project file”.
9.1. Project File
Obtain the latest “Sysmac Studio project file” from OMRON beforehand.
Name
File name
Version
Sysmac Studio project file
(extension: SMC)
OMRON_NE1A_DN_EV100.SMC
Ver.1.00
47
Personal computer
Controller
Safety
Network
Controller
9.2. Overview of Setting Up Remote I/O Communications Using “Project File”
The following figure shows the relationship of processes to perform DeviceNet remote I/O
communications using the “Sysmac Studio project file”.
Configuration file
“Sysmac Studio
pro
ject file“
Transferring
project data
Importing
project file
Transferring
scan list
Settings made with Network
Configurator
•Creating network configuration
•Setting device
(creating scan list)
Network Configurator
Sysmac Studio
Transferring
parameters

Omron NJ501 Specifications

General

Brand	Omron
Model	NJ501
Category	Controller
Language	English