4 Installation and Wiring
4 - 6
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
Always turn OFF the Unit power supply and I/O power supply before you remove the NX Unit.
1 Use a flat-blade screwdriver to pull up the DIN Track mounting hook on the Unit to remove.
2 Put your fingers on the protrusions for removing multiple NX Units including the Unit to be
removed, then pull out straight forward to remove.
4-1-3 Removing NX Units
Flat-blade screwdriver
DIN track mounting hook
Protrusion for removing the Unit
Protrusion for removing the Unit
To Next Page
Loading...
Need help?
General
