Omron SYSMAC CV1000 Installation Guide

12
1-8 CPU Comparison
The following table shows differences between the various CV-series CPUs.
CPU
CVM1-
CPU01-EV2
CVM1-
CPU11-EV2
CVM1-
CPU21-EV2
CV500-
CPU01-EV1
CV1000-
CPU01-EV1
CV2000-
CPU01-EV1
P
Ladder diagrams Supported Supported Supported Supported Supported Supported
Program-
ming
SFC Not supported Not supported Not supported Supported Supported Supported
m
i
ng
Instructions 284 284 285 169 170 170
Speed
Basic
instructions (ms)
0.15 to 0.45 0.125 to 0.375 0.125 to 0.375 0.15 to 0.45 0.125 to 0.375 0.125 to 0.375
Other
instructions (ms)
0.6 to 9.9 0.5 to 8.25 0.5 to 8.25 0.6 to 9.9 0.5 to 8.25 0.5 to 8.25
Program capacity (see note) 30K words 30K words 62K words 30K words 62K words 62K words
Local I/O capacity 512 pts 1,024 pts 2,048 pts 512 pts 1,024 pts 2,048 pts
Remote
I/O
SYSMAC BUS/2 1,024 pts 2,048 pts 2,048 pts 1,024 pts 2,048 pts 2,048 pts
I/O
capacity
SYSMAC BUS 512 pts 1,024 pts 2,048 pts 512 pts 1,024 pts 1,024 pts
DM Area 8K words 24K words 24K words 8K words 24K words 24K words
Expansion DM Area Not supported Not supported
32K words
each for 8
banks
Not supported
32K words
each for 8
banks
32K words
each for 8
banks
Timers 512 1,024 1,024 512 1,024 1,024
Counters 512 1,024 1,024 512 1,024 1,024
SFC steps None None None 512 1,024 1,024
Step Flags None None None 512 1,024 1,024
T ransition Flags None None None 512 1,024 1,024
Note The useable program capacity is 28K words or 60K words.
1-9 Improved Specifications
1-9-1 Upgraded Specifications
The following improvements are applicable to all CV500-CPU01-E and
CV1000-CPU01-E CPUs with lot numbers in which the rightmost digit is 3
(jjj3) or higher.
1, 2, 3... 1. The MLPX(110) (4-TO-16 DECODER) instruction has been improved to
also function as a 8-to-256 decoder and the DMPX(1 1 1) (16-T O-4 ENCOD -
ER)
instruction has been improved to also function as a 256-to-8 encoder .
To enable this improvement, the digit designator (Di) has been changed as
shown below.
Specifies the first digit to be converted
4-to-16/16-to-4: 0 to 3
8-to-256/256-to-8: 0 or 1
Number of digits to be converted
4-to-16/16-to-4: 0 to 3 (1 to 4 digits)
8-to-256/256-to-8: 0 or 1 (1 or 2 digits)
Process
0: 4-to-16/16-to-4
1: 8-to-256/256-to-8
Digit number: 3210
0
2. The following operating parameter has been added to the PC Setup.
JMP(004) 0000 Processing
Y: Enable multiple usage (default)
N: Disable multiple usage
Improved Specifications Section 1-9

Omron SYSMAC CV1000 Specifications

General

Brand	Omron
Model	SYSMAC CV1000
Category	Controller
Language	English