Onkyo BD-SP308 User Manual

12
En
■ Additional Information for HDMI
• When you connect a HDMI or DVI compatible device,
make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on this
player.
- The connected device’s video input is set correctly for
this unit.
- The connected device is compatible with 720x480p,
1280x720p, 1920x1080i or 1920x1080p video input.
• Not all HDCP-compatible HDMI or DVI devices will
work with this player.
- The picture will not be displayed properly with non-
HDCP device.
- This player does not playback and TV screen is
changed to black screen.
Connect the VIDEO OUTPUT (COMPONENT) jacks
on the player to the corresponding input jacks on the TV
using component video cable. Connect the left and right
ANALOG AUDIO OUTPUT jacks of the player to the
audio left and right IN jacks on the TV using the audio
cables.
Component Video/Audio Connection
Note
• When you use VIDEO OUTPUT (COMPONENT) connection,
you can change the resolution for the output. Refer to “Resolu-
tion Setting” (➔ 13).
Component Video Connection
L
YP
B PR
R
this unit
Component video
cable
TV
Audio cable

Onkyo BD-SP308 Specifications

General

Dynamic range (1kHz)	86 dB
Frequency response CD	4 - 20000 Hz
Frequency response DVD	4 - 44000 Hz
Signal-to-Noise Ratio (SNR)	100 dB
Backlight color	Orange
Disc types supported	BD-R, BD-RE, BD-ROM, CD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Optical disc diameter	120 mm
Number of optical discs	1 discs
Depth	209 mm
Width	435 mm
Height	53 mm
Weight	2000 g
Device type	DVD player
Form factor	Set-top
Ethernet LAN	Yes
HDMI version	1.3a
Package depth	298 mm
Package width	520 mm
Package height	129 mm
Package weight	3000 g
AC input voltage	200-240 V
AC input frequency	50 - 60 Hz
Supported video modes	1080i, 1080p, 576p, 720p
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio formats supported	MP3, WMA
Image formats supported	JPG, PNG
Video formats supported	DIVX
Analog signal format system	NTSC, PAL
Operating temperature (T-T)	5 - 35 °C
Power consumption (standby)	0.1 W
Power consumption (typical)	20 W
Operating relative humidity (H-H)	5 - 90 %