Onkyo BD-SP308 User Manual

26
En
On-Screen display
You can display and adjust various information and set-
tings about the content.
W E R Y
Note
• If no button is pressed for a few seconds, the on-screen display
disappears.
• A title number cannot be selected on some discs.
• Available items may differ depending on discs or titles.
• If BD interactive title is playing back, some setting information
is displayed on the screen but prohibited to be changed.
W E R Y
Note
• This function may not work on some disc or titles.
W E R Y
Note
• Some discs allow you to change audio selections only via the
disc menu. In this case, press POP UP MENU/MENU or TOP
MENU button and choose the appropriate audio from the selec-
tions on the disc menu.
• Immediately after you have switched sound, there may be a tem-
porary discrepancy between the display and actual sound.
• On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is
displayed with “MultiCH” in the onscreen display.
Displaying content information
on-screen
1
During playback, press DISPLAY to show various
playback information.
a Title
Current title number/total number of titles.
b Chapter
Current chapter number/total number of chap-
ters.
c Time
Elapsed playing time/total playback time.
d Audio
Selected audio language or channel.
e Subtitle
Selected subtitle.
f Angle
Selected angle/total number of angles.
g TV Aspect Ratio
Selected TV aspect Ratio.
h Picture Mode
Selected picture mode.
2
Select an option using q/w.
3
Use e/r to adjust the selected option value.
4
Press RETURN (l) to exit the On-Screen dis-
play.
a
h
g
f
e
d
c
b
Playing from selected time
1
Press DISPLAY during playback.
The time search box shows the elapsed playing time.
2
Select the “Time” option and then input the
required start time in hours, minutes, and seconds
from left to right.
For example, to find a scene at 2 hours, 10 minutes,
and 20 seconds, enter “21020”.
Press e/r to skip the playback 60 seconds forward
or backward.
3
Press ENTER (j) to start playback from selected
time.
Hearing different audio
1
During playback, press DISPLAY to display the
On-Screen display.
2
Use q/w to select the “Audio” option.
3
Use e/r to select desired audio language, audio
track or audio channel.

Onkyo BD-SP308 Specifications

General

Dynamic range (1kHz)	86 dB
Frequency response CD	4 - 20000 Hz
Frequency response DVD	4 - 44000 Hz
Signal-to-Noise Ratio (SNR)	100 dB
Backlight color	Orange
Disc types supported	BD-R, BD-RE, BD-ROM, CD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Optical disc diameter	120 mm
Number of optical discs	1 discs
Depth	209 mm
Width	435 mm
Height	53 mm
Weight	2000 g
Device type	DVD player
Form factor	Set-top
Ethernet LAN	Yes
HDMI version	1.3a
Package depth	298 mm
Package width	520 mm
Package height	129 mm
Package weight	3000 g
AC input voltage	200-240 V
AC input frequency	50 - 60 Hz
Supported video modes	1080i, 1080p, 576p, 720p
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio formats supported	MP3, WMA
Image formats supported	JPG, PNG
Video formats supported	DIVX
Analog signal format system	NTSC, PAL
Operating temperature (T-T)	5 - 35 °C
Power consumption (standby)	0.1 W
Power consumption (typical)	20 W
Operating relative humidity (H-H)	5 - 90 %