EasyManuals Logo
Home>Onkyo>Blu-ray Player>BD-SP308

Onkyo BD-SP308 User Manual

Onkyo BD-SP308
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
En
Notes on Network Connection:
Many network connection problems during set up can
often be fixed by re-setting the router or modem. After
connecting the player to the home network, quickly
power off and/or disconnect the power cable of the home
network router or cable modem. Then power on and/or
connect the power cable again.
Depending on the internet service provider (ISP), the
number of devices that can receive internet service may
be limited by the applicable terms of service. For details,
contact your ISP.
Our company is not responsible for any malfunction of
the player and/or the internet connection feature due to
communication errors/malfunctions associated with your
broadband internet connection, or other connected
equipment.
The features of BD-ROM discs made available through
the Internet Connection feature are not created or pro-
vided by our company, and our company is not responsi-
ble for their functionality or continued availability. Some
disc related material available by the Internet Connection
may not be compatible with this player. If you have
questions about such content, please contact the pro-
ducer of the disc.
Some internet contents may require a higher bandwidth
connection.
Even if the player is properly connected and configured,
some internet content may not operate properly because
of internet congestion, the quality or bandwidth of your
internet service, or problems at the provider of the con-
tent.
Some internet connection operations may not be possible
due to certain restrictions set by the Internet service pro-
vider (ISP) supplying your broadband Internet connec-
tion.
Any fees charged by an ISP including, without limita-
tion, connection charges are your responsibility.
A 10 Base-T or 100 Base-TX LAN port is required for
wired connection to this player. If your internet service
does not allow for such a connection, you will not be
able to connect the player.
You must use a Router to use xDSL service.
A DSL modem is required to use DSL service and a
cable modem is required to use cable modem service.
Depending on the access method of and subscriber
agreement with your ISP, you may not be able to use the
internet connection feature contained in this player or
you may be limited to the number of devices you can
connect at the same time. (If your ISP limits subscription
to one device, this player may not be allowed to connect
when a PC is already connected.)
The use of a “Router” may not be allowed or its usage
may be limited depending on the policies and restrictions
of your ISP. For details, contact your ISP directly.
5
If you select “Test” and press ENTER (j) at step
4 above, the network connection status is dis-
played on the screen.
You can also test it on the “Connection Status” in
the “Setup” menu.

Table of Contents

Other manuals for Onkyo BD-SP308

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo BD-SP308 and is the answer not in the manual?

Onkyo BD-SP308 Specifications

General IconGeneral
Dynamic range (1kHz)86 dB
Frequency response CD4 - 20000 Hz
Frequency response DVD4 - 44000 Hz
Signal-to-Noise Ratio (SNR)100 dB
Backlight colorOrange
Disc types supportedBD-R, BD-RE, BD-ROM, CD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Optical disc diameter120 mm
Number of optical discs1 discs
Depth209 mm
Width435 mm
Height53 mm
Weight2000 g
Device typeDVD player
Form factorSet-top
Ethernet LANYes
HDMI version1.3a
Package depth298 mm
Package width520 mm
Package height129 mm
Package weight3000 g
AC input voltage200-240 V
AC input frequency50 - 60 Hz
Supported video modes1080i, 1080p, 576p, 720p
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio formats supportedMP3, WMA
Image formats supportedJPG, PNG
Video formats supportedDIVX
Analog signal format systemNTSC, PAL
Operating temperature (T-T)5 - 35 °C
Power consumption (standby)0.1 W
Power consumption (typical)20 W
Operating relative humidity (H-H)5 - 90 %

Related product manuals