Onkyo NS-6130 User Manual

> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
3
E
N
Front Panel
Part Names
1. ÍON/STANDBY button: Turns the unit on or to standby mode.
2. Remote control sensor
3. Display (P6)
4. Play button:
∫ : This button stops playback.
1 /; : Play or pause play.
5. MENU/ENTER dial (
:/9)
When playing, turn left or right to select the folder or file, then press to confirm.
Press and hold to show the settings screen. While the menu is displayed, turn the dial to
select items and press to confirm the settings.
0 Depending on the input, the operation may not start.
6. USB
port: Connect a USB storage device or HDD (hard disk drive) to play music files. You can
also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.
0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port
(maximum 5 V/1 A) on the rear of the unit.
7. DISPLAY button: Switches the information on the display.
8. INPUT button: Switches the input to be played.
9. RETURN button: Returns to the previous screen.
  
 

Onkyo NS-6130 Specifications

General

Receiver type	Surround
Frequency range	4 - 70000 Hz
Audio output channels	- channels
Signal-to-Noise Ratio (SNR)	112 dB
Total Harmonic Distortion (THD)	0.002 %
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	0
USB ports quantity	2
Ethernet LAN (RJ-45) ports	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	RCA
Bluetooth	No
Ethernet LAN	Yes
Supported radio bands	-
Product color	Black
Audio formats supported	AAC, AIFF, FLAC, MP3
Package depth	388 mm
Package width	540 mm
Package height	210 mm
Package weight	5600 g
Cables included	AC
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (typical)	22 W

Weight and Dimensions

Depth	317 mm
Width	435 mm
Height	100 mm
Weight	3500 g