Onkyo NS-6130 User Manual

6
> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
E
N
Display
1. ASb: Lights when "Auto Standby" (P22) is set to "On".
2. DSD: Lights when the audio signal being input is DSD.
3. Lights when remote controller cursor operations are possible.
4. Displays the play status.
5. DIMMER indicator: Lights when you have pressed DIMMER to turn the display off.
6. Message display: Displays information about tracks and menus.
0 Characters that cannot be displayed on this unit are replaced with asterisks (
＊ ).
0 The following icons are displayed.
: Folder
: Track title
: Playing
: Paused
: Artist
: Album
: 1-track repeat
: Repeat within a folder
: Shuffle
0 When DIMMER is pressed to turn off the display, the unit may appear the same as if you
had unplugged the unit from the power outlet, but electricity is still being supplied to the
unit. To completely cut the unit off from the power supply, you need to unplug the power
plug (shutoff device) unit from the power outlet.
ASb DSD
 



Onkyo NS-6130 Specifications

General

Receiver type	Surround
Frequency range	4 - 70000 Hz
Audio output channels	- channels
Signal-to-Noise Ratio (SNR)	112 dB
Total Harmonic Distortion (THD)	0.002 %
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	0
USB ports quantity	2
Ethernet LAN (RJ-45) ports	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	RCA
Bluetooth	No
Ethernet LAN	Yes
Supported radio bands	-
Product color	Black
Audio formats supported	AAC, AIFF, FLAC, MP3
Package depth	388 mm
Package width	540 mm
Package height	210 mm
Package weight	5600 g
Cables included	AC
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (typical)	22 W

Weight and Dimensions

Depth	317 mm
Width	435 mm
Height	100 mm
Weight	3500 g