Onkyo R-100 User Manual

iE]
Control
positions
and
functions
(See page 2)
1
Power
Button
(POWER)
Press
once
to
turn
power
on
and
once
again
to
turn
power
off.
The
MULTI
FUNCTION
DISPLAY
is
illuminated
when
power
is
on,
and
the
time
is
displayed
when
power
is
off.
The
button
is
also
enabled
by
button
on
the
remote
control
trans-
mitter.
Remote
Control
Sensor
This
sensor
receives
the
remote
controi
signals.
Multi-function
Display
(MULTI
FUNCTION
DISPLAY)
Refer
to.
page
8.
Input
Selector
Button
(SOURCE)
The
display
changes
from
PHONO,
FM,
AM,
CD,
TAPE,
VDP,
VCR,
then
to
PHONO
each
time
the
button
is
pressed.
PHONO:
Select
to'listen
to
the
turntable.
FM:
Select
to
listen
to
a
FM
broadcast.
AM:
.
Select
to
listen
to
an
AM
broadcast.
CD:
Select
to
listen
to
the
compact
disc
player.
TAPE:
Select
to
listen
to
the
tape
deck.
When recording on tape deck, the just-recorded
signal can not be monitored even if the tape deck
is a 3-head model.
VDP:
Select
to
obtain
the
video
and
audio
signals
from
the
Video
Cassette
Player
or
Video
Disc
Player
connected
to
the
VDP
jacks
(for
playback
only).
VCR:
Select
to
obtain
the
video
and
audio
signals
from
the
Video Cassette Recorder connected to the VCR jacks.
The
button
is
also
enabled
by
the
button
on
the
remote
control
transmitter.
Volume
Control
Knob
(VOLUME)
Turn
clockwise
to
increase
the
volume
level.
The
volume
can
be
adjusted
manually
and
by
the
remote
control
transmitter’s
Volume
up/down
(
a
,
VW)
button.
Headphone jack (PHONES)
Stereo
headphones
with
a
standard
binaural
plug
can
be
connected
here.
No
sound
wiil
be
output
to
the
speakers
when
headphones
are
connected
to
this
jack.
Adjust Button (ADJUST)
Use
this
button
to
adjust
the
current
time.
Refer
to
the
section
“How
to
Set
the
Current
Time”
for
details.
(Refer
to
page
10.)
Program
Button
(PROGRAM)
Use
this
button
for
“time
reservation”.
Refer
to
the
section
“How
to
Set
the
Timer
Reservation”
for
details.
(Refer
to
page
11.)
Timer
Stand-by
Button
(TIMER
STAND-BY)
Press
this
button
to
cancel
the
“timer
reservation”.
FM Mode Button (AUTO/MONO)
When
the
mode
button
is
set
to
AUTO,
the
indicator
lights
and
FM
stereo
station
reception
is
enabled.
When
the
FM
stereo
reception
is
weak
and
noisy,
press
the
mode
button
and
the
indicator
will
go
off.
The
indicator
will
come
on,
and
noise-free
monaural
re-
ception
will
be
enabled.
The
indicator
will
go
off.
(This
mode
operation
can
only
be
used
for
FM
reception.)
Memory Button (MEMORY)
Press
this
button
to
register
a
station
in
memory.
This
button
is
also
used
for
setting
the
time
or
for
making
a
timer
setting.
(Refer
to
pages
9,
10
and
11.)
Preset/Tuning/Time
Set
Button
(
<«
DOWN/UP
P
)
@
This
is
used
to
select
the
preset
stations
(up
to
30
stations)
to
be
used
from
the
memory.
(Refer
to
page
9
for
“Memory
Function”.)
@
Pressingthe
<<
DOWN
button
will
decrease
the
frequency
being
received,
and
pressing
the
UP_
®
button
will
in-
crease
the
frequency.
Pressing
either
button
for
more
than
0.5
seconds
and
then
releasing
it
will
cause
the
frequency
to
change
automatically
until
it
picks
up
a
station.
-7-
@
These
buttons
are
also
used
to
move
the
time
ahead
or
back
when
setting
the
time
or
setting
on
the
timer.
@
Remote
Control
Transmitter
Controls
RC-174S
fl &
Sleep button (SLEEP)
Press to set the power off timer. The sleep. timer is a function
which turns off the power to the system from the time it is set.
Refer to the section “How to Operate the Sleep Timer” for
details. (Refer to page 10.)
CD Operation Buttons (CD)
These
buttons
are
used
to
operate
the
C-100
ONKYO
CD
player.
a : Press this button to stop the CD player.
u : Press this button to pause the CD play back.
To resume disc play, press the PLAY button.
> : Press this button to play the CD player.
4 : Press this button to go back to the beginning
of the current track and again to skip back to
the previous track.
bri : Press this button to skip to the next track.
1~9, 0, +10: Press these buttons for a Direct Play or to. pro-
gram a track number into memory. Press +10
button to select or program a track with a track
number of 10 or higher. For example, to select
Track Number 30, press this button three times,
and then press 0.
Refer to the CD player instruction manual for additional in-
formation.
Tape Operation Buttons (DECK)
These buttons are used to operate the K-100 ONKYO cassette
tape deck.
4: The tape plays, moving from right to left, or, in the re-
cording stand-by mode, recording begins.
@ : Interrupts all operations.
> : The tape plays, moving from left to right, or, in the re-
cording stand-by mode, recording begins.
@/88 : When this is pressed, the recording stand-by mode is
entered. (Only Deck-B)
<4: Fast forward from right to left.
p> : Fast forward from left to right.
Tuner Operation Buttons ( « PRESET > )
When the up ( » ) or down ( < ) button is pressed, the next
higher or lower memory channel is recalled. Each time up or
down button is pressed, the following memory channel in the
corresponding direction is recalled. If the button is held down
the memory channel will increase or decrease continuously
until button is released.
Bass Control Buttons (BASS)
Treble Control Buttons (TREBLE)
The remote contro! transmitter can be used to carry out tone
(treble and bass) control. This can be adjusted by pressing the
up
(| a«
)ordown(
w_)
button
for
either
the
Bass
or
Treble.
13 levels (+12~—12) are available for both the Bass and Treble
controls. 0 is used for a flat setting.
@ The previously selected source will be displayed approx. 5
seconds after the up or down button is released.
@ The DIRECT function will be cancelled automatically when
the bass or treble button is pressed.
Direct Button (DIRECT)
When you select DIRECT, you can obtain a “pure” sound re-
production, by passing the bass, treble, processor and using
only the volume control. The [SOURCE DIRECT ]on the display
lights up.
Audio Muting Button (MUTING)
This button temporarily switches off the sound from the
speakers or headphones. Pressing this button will operate the
R-100's audio muting circuit, and the indicator
will come on. Pressing the button again will turn off the audio
muting function. The sound can also be turned on again by
pressing the volume button.

Onkyo R-100 Specifications

General

Brand	Onkyo
Model	R-100
Category	Amplifier
Language	English