Do you have a question about the Onkyo T-405X and is the answer not in the manual?
FM tuning range (U.S. & Canadian models) | 87.90 – 107.90 MHz, 200 kHz steps |
---|---|
FM tuning range (Other area models) | 87.50 – 108.00 MHz, 50 kHz steps |
FM usable sensitivity (Mono) | 12.8 dBf 1.2 µV, 75 Ohms IHF |
FM usable sensitivity (Stereo) | 19.2 dBf 2.5 µV, 75 Ohms IHF |
FM 50dB quieting sensitivity (Mono) | 18.0 dBf 2.2 µV, 75 Ohms |
FM 50dB quieting sensitivity (Stereo) | 38.0 dBf 22 µV, 75 Ohms |
FM capture ratio | 1.5 dB |
FM image rejection ratio | 85 dB |
FM IF rejection ratio | 90 dB |
FM signal-to-noise ratio (Mono) | 73 dB IHF |
FM signal-to-noise ratio (Stereo) | 66 dB IHF |
FM selectivity | 50 dB DIN (±300 kHz, 40 kHz dev.) |
FM AM suppression ratio | 50 dB |
FM total harmonic distortion (Mono) | 0.5% |
FM total harmonic distortion (Stereo) | 0.8% |
FM frequency response | 30 – 15, 000 Hz (±1.5 dB) |
FM stereo separation | 40 dB at 1 kHz, 30 dB at 70 – 10, 000 Hz |
FM output level (U.S. & Canadian models) | 0.5 V |
FM output level (Other area models) | 0.75 V |
FM muting level | 17.2 dBf 2.0 µV, 75 Ohms |
AM tuning range | 530 – 1, 710 kHz, 10 kHz steps |
---|---|
AM usable sensitivity | 30 µV |
AM image rejection ratio | 30 dB |
AM IF rejection ratio | 40 dB |
AM signal-to-noise ratio | 40 dB |
AM total harmonic distortion | 0.8% |
AM output level | 0.15 V |
Power supply (AC 120 V) | 60 Hz |
---|---|
Power supply (AC 230 V) | 50 Hz |
Power consumption | 9 W |
Dimensions | 205 × 76 × 279 mm |
Dimensions (inches) | 8-1/16" × 3" × 11" |
Weight | 1.7 kg |
Weight (lbs) | 3.7 lbs. |