14
Setting the clock manually
The following procedures are based on the front
panel of the T-405X. However, you can also
perform the procedure using the remote controller
that comes with Onkyo A-905X amplifier.
On the remote controller, press the “ENTER” button
and “UP/DOWN” button instead of the “MEMORY”
button and PRESET√/® button respectively.
1 Press the TIMER button until “AD-
JUST” is selected on the display,
then press the MEMORY button.
TIMER
MEMORY
The day of the week will flash on the display.
Non-U.S. and non-Canadian models:
“AUTO” or “MANUAL” appears on the
display.
If “MANUAL” appears on the display, press
the MEMORY button. If “AUTO” appears on
the display, press the PRESET √ or ® button
to select “MANUAL,” then press the
MEMORY button.
The day of the week will flash on the display.
T-405X
FM STEREO TUNER
MEMORYTIMER CLEAR
AUTO/ MONO
STANDBY/ON
ACCUCLOCK
TUNING
PRESET
CHARACTERDISPLAY
POWER
CLOCK CALL
TUNER
PRESET
SLEEP
FM AM
REPEAT SCROLL
PLAY MODE
CLEAR
REC
REPEAT RANDOM
MEMORY CLEAR
TIMER
1
ACOUSTIC
PRESENCE
DVD
2
DISC
CD/MD
EFFECT
PAUSE/STEP
3
456
UP/DOWN
789
ENTER - - / - - - 10/0 MUTING
VOLUME
G.EQUALIZER
TAPE
MODE
INPUT SELECTOR
MD
CD
RC-398SREMOTE CONTROLLER
TIMER
ENTER
UP/DOWN
TIMER
MEMORY
√PRESET®
2 Press the PRESET √ or ® button
until the desired day of the week
is selected, then press the MEMORY
button.
PRESET
MEMORY
The time will flash on the display.
3 Use the PRESET √ or ® button to
set the desired time.
4 Press the MEMORY button.
The clock will start operating.
Note
The ACCUCLOCK function is disabled if you set the
clock manually. If you wish to enable the ACCUCLOCK
function, refer to the following section.
The remote con-
troller comes with
the Onkyo A-905X
amplifier.
Setting the Clock
To Next Page
Loading...
Need help?
FM Specifications
