13
Before Using
Connections
Other Information
Operation
The following procedures are based on the front
panel of the T-405X. However, you can also
perform the procedure using the remote controller
that comes with Onkyo A-905X amplifier.
On the remote controller, press the “ENTER”
button and “UP/DOWN” button instead of the
“MEMORY” button and PRESET√/® button
respectively.
Confirming/changing the RDS
station used by ACCUCLOCK
If you wish to know which RDS station has been
used to set the clock by ACCUCLOCK, or to use a
different RDS station signal to set the clock, follow
the steps below:
1 Press the TIMER button repeatedly
until “ADJUST” is selected on the
display, then press the MEMORY
button.
TIMER
MEMORY
“AUTO” or “MANUAL” appears on the
display.
2 If “AUTO” appears on the display,
press the MEMORY button. If
“MANUAL” appears on the display,
press the PRESET √ or ® button to
select “AUTO,” then press the
MEMORY button.
MEMORY
MHz
The example shown above indicates that the
ACCUCLOCK function uses the RDS station whose
information appears on the display (FM 88.10 MHz).
If RDS station signals cannot be received
successfully, “-
-.-
-” will appear instead of the radio
frequency of the station. If you wish to change
the selected RDS station or if no RDS station is
selected, choose the desired RDS station by using
the PRESET√ or ® button, then press the
MEMORY button.
T-405X
FM STEREO TUNER
MEMORYTIMER CLEAR
AUTO/ MONO
STANDBY/ON
ACCUCLOCK
TUNING
PRESET
CHARACTERDISPLAY
POWER
CLOCK CALL
TUNER
PRESET
SLEEP
FM AM
REPEAT SCROLL
PLAY MODE
CLEAR
REC
REPEAT RANDOM
MEMORY CLEAR
TIMER
1
ACOUSTIC
PRESENCE
DVD
2
DISC
CD/MD
EFFECT
PAUSE/STEP
3
456
UP/DOWN
789
ENTER - - / - - - 10/0 MUTING
VOLUME
G.EQUALIZER
TAPE
MODE
INPUT SELECTOR
MD
CD
RC-398SREMOTE CONTROLLER
TIMER
ENTER
UP/DOWN
TIMER
MEMORY
√PRESET®
The remote con-
troller comes with
the Onkyo A-905X
amplifier.
To Next Page
Loading...
Need help?
FM Specifications
