Onkyo TX-SR607 User Manual

60
UP-A1 series Dock for iPod—Continued
a Arrow [q]/[w] and ENTER buttons
Used to navigate menus and select items.
b Previous [7] button
Restarts the current song. Press it twice to select the
previous song.
c Rewind [5] button
Press and hold to rewind.
d Pause [3] button
Pauses playback.
e REPEAT button
Used with the repeat function.
f MUTING button (53)
Mutes or unmutes the AV receiver.
g ALBUM +/– button
Selects the next or previous album.
h VOL [q]/[w] button (51)
Adjusts the volume of the AV receiver.
i PLAYLIST [e]/[r] buttons
Selects the previous or next playlist on the iPod.
j RETURN button
Exits the menu or returns to the previous menu.
k Play [1] button
Starts playback. If the component is off, it will turn
on automatically.
l Next [6] button
Selects the next song.
m Fast Forward [4] button
Press and hold to fast forward.
n Stop [2] button
Stops playback and displays a menu.
o RANDOM button
Used with the shuffle function.
Status messages
Note:
In case of a transmission error without a status message
appearing in the front panel, check the connection to
your iPod.
❏ UP-A1 series Dock in connection with the
check
This unit is in the middle of recognizing the connection
with your iPod.
This unit is in the middle of acquiring song lists from
your iPod.
❏ UP-A1 series Dock does not support the
control
The iPod being used is not supported by this unit.
❏ UP-A1 series Dock is connected
Your iPod is properly stationed in a UP-A1 series Dock
connected to the UNIVERSAL PORT jack of this unit,
and the connection between your iPod and this unit is
complete.
When connection is confirmed, “UP-A1” is displayed
for about 8 seconds.
❏ UP-A1 series Dock is not connected
Your iPod was removed from a UP-A1 series Dock con-
nected to the UNIVERSAL PORT jack of this unit.
Station your iPod back in a UP-A1 series Dock con-
nected to the UNIVERSAL PORT jack of this unit.

Onkyo TX-SR607 Specifications

General

Channels	7.2
HDMI Inputs	4
HDMI Outputs	1
Response Bandwidth	5 Hz - 100 kHz
Signal-To-Noise Ratio	106 dB
THD	0.08%
HD Radio Ready	No
Surround System Class	7.2 channel
HDMI Switching	Yes
Audio D/A Converter	192kHz/24-bit
Video Conversion/Scaling	Yes
HDMI Pass-Through	Yes
Bluetooth	No
Wi-Fi	No
Ethernet	No
USB Port	No
Power Output	90W per channel (8 ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven)
Dolby Technologies	Dolby Digital, Dolby Digital EX, Dolby TrueHD, Dolby Pro Logic IIx
DTS Technologies	DTS-HD Master Audio, DTS Neo:6
Audyssey Technologies	Audyssey Dynamic EQ, Audyssey Dynamic Volume, Audyssey 2EQ
Amplifier Output Details	90 W - 8 Ohm - 20 Hz - 20 kHz - THD 0.08% - 2 channels
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Video Upconversion	Yes