EasyManuals Logo

Onkyo TX SR608 User Manual

Onkyo TX SR608
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
En
Connect your components to the appropriate jacks. The default input assignments are shown below.
: Assignment can be changed ( 39).
Refer to “About HDMI” ( 72) and “Using an RIHD-compatible TV, Player, or Recorder” ( 73).
Tip
To listen to audio received by the HDMI IN jacks through your TV’s speakers:
Set the “TV Control” setting to “On” ( 52) for an p-compatible TV.
•Set theAudio TV Out” setting to “On” ( 51) when the TV is not compatible with p or the “TV Control” setting to “Off”.
Set your Blu-ray Disc/DVD players HDMI audio output setting to PCM.
To listen to TV audio through the AV receiver, see “Connecting External Components” ( 18).
Note
When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV
screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to
another input source, this may result in no sound from the AV receiver or the sound may be cut off.
•When theAudio TV Out” setting is set to “On” ( 51) to hear from your TV’s speakers, by controlling the AV receiver’s volume,
the sound will be output from the AV receiver’s speakers, too. When the
TV Control” setting is set to On ( 52) to hear from
speakers of p-compatible TV, by controlling the AV receiver’s volume, the AV receiver’s speakers will produce sound while the
TV’s speakers are muted. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
Audio return channel (ARC) function
Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the
AV receiver. To use this function, you must select the TV/CD input selector.
To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and “HDMI
Control” is set to “On”(
52).
Connecting Components with HDMI
Jack Signal Components Assignable
Input HDMI IN 1 Audio/Video Blu-ray Disc/DVD player
HDMI IN 2 VCR or DVD recorder/Digital Video Recorder
HDMI IN 3 Satellite, cable, set-top box, etc.
HDMI IN 4 Game console
HDMI IN 5 Personal computer
AUX INPUT HDMI Camcorder
Output HDMI OUT TV, projector, etc.
Game console
VCR or DVD recorder/Digital Video Recorder
TV, projector, etc.
Satellite, cable, set-top box, etc.
Blu-ray Disc/DVD player
Camcorder
Personal
computer

Table of Contents

Other manuals for Onkyo TX SR608

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX SR608 and is the answer not in the manual?

Onkyo TX SR608 Specifications

General IconGeneral
Impedance4 Ω
Frequency range5 - 100000 Hz
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)106 dB
Total Harmonic Distortion (THD)0.08 %
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Radio Data System (RDS)Yes
Package depth570 mm
Package width423 mm
Package height297 mm
Dimensions (WxDxH)435 x 176 x 329 mm
Power requirementsAC 230 V, 50 Hz
Product colorSilver
Package weight14000 g
Power consumption (typical)620 W
Weight and Dimensions IconWeight and Dimensions
Weight11500 g

Related product manuals