Optex REDSCAN Series User Manual

57
[Anti-Masking]
This is to detect obstacles which mask the detector. The result is reflected to relay output and R.E.C.
⚫ Judgement Time: Set the minimum duration for the detection.
⚫ Area Ratio: Set the minimum ratio of masked area for the detection.
⚫ Sensitivity: Select sensitivity for the detection.
[Anti-Rotation]
This is to detect that someone rotated the detector. The result is reflected to relay output and R.E.C.
⚫ Judgement Time: Set the minimum duration for the detection.
⚫ Area Ratio: Set the minimum area ratio for the detection.
[Soiling of Laser Window]
This is to detect dirt on Laser Window. The result is reflected to relay output and R.E.C.
⚫ Judgement Time: Set the minimum duration for the detection.
⚫ Area Ratio: Set the minimum ratio of the dirty Laser Window for the detection.
[DQ Output]
If it is enabled, DQ Output is activated while fog, rain, or snow is detected. DQ Output can be included in
relay output and R.E.C.
⚫ Off Delay Time: Set the time to deactivate the DQ Output after the detection of fog, rain, or snow is
finished.
3. Click Next button and click Save button in the next page to save the changes.

Optex REDSCAN Series Specifications

General

Brand	Optex
Model	REDSCAN Series
Category	Security Sensors
Language	English