Optex REDSCAN Series User Manual

69
Notes:
⚫ To show R.E.C. on REDSCAN Manager, UDP is required. Select Broadcast, or Unicast with IP
Address of the PC.
⚫ To sent R.E.C. to VMS (Video Management Software), TCP is recommended. Select TCP and set IP
Address of the PC of VMS.
⚫ To add multiple REDSCANs to Milestone XProtect, set unique Port Number to each REDSCAN. Over
12346 is recommended.
Transmission interval of Trouble code: It specifies interval when trouble code is sent periodically.
Clear Code Timing: It specifies the timing of clear code after the alarm is cleared.
Heartbeat for Device Monitoring: If it is checked, DM code is stored in R.E.C. and sent by Transmission
Interval of Trouble Code.
3. Click Save button.

Optex REDSCAN Series Specifications

General

Brand	Optex
Model	REDSCAN Series
Category	Security Sensors
Language	English