30 troUBLeShootIng
No Link
displaying on
parent unit
− Move the parent unit closer to
the baby unit.
Try resetting your monitor to
avoid busy channels:
1. Turn both camera and parent
units off and remove the battery
in the parent unit. Leave
unplugged for 20 seconds.
2. If you have Wi-Fi in the home,
make it busy by streaming a
video on YouTube or similar.
3. Turn the camera back on wait
for 30 seconds.
4. Plug the battery into the parent
unit and turn on.
If the display is still showing
“Link Lost”, please delete and
re-pair the camera as instructed
on page 12. When pairing it is
best to keep the camera and
parent units close together
(within 1m) and keep clear of
all other electronic devices
including mobile phones, tablets
or computers.
Reception
interference
− Move the parent unit closer to
the baby unit.
Reposition the baby unit slightly.
Check for interference from
other electronic devices such as
Wi-Fi.
OR017650 - SC740 User Guide_05-10-19.indd 30 2019/5/10 13:05:42
To Next Page
Loading...
Need help?
General
