17
Memory write channels
The Memory write button is used to store a channel in the memory
locations M1 to M4.
To store channels:
• Select the desired channel with rotary knob.
• Press and hold MR/MW button.
• Select the location you would like to store the
channel by pressing M1, M2, M3 or M4.
Memory scan
• Press SC/MEM button to start scanning.
• Whilst radio is in scan mode, push and hold the SC/MEM button for
2 seconds, the radio will now start scanning the stored channels in
M1, M2, M3 and M4.
• When you want to stop scanning, you can press the SC/MEM
button or push the PTT button.
Menu Function
The Menu function provides a convenient method of customizing
some of the radios functions.
The following menu options are available:
Note that some items are only available on certain channels.
To access the Menu functions:
1. Press and hold the TW/MENU button. The rst menu function is
displayed.
2. Briey press the menu button to cycle through each available
function.
After the last function has been selected, the cycle automatically
exits the menu.
3. Use the volume control to change the parameters of the selected
function.
Press
and hold
Operations
To Next Page
Loading...
Need help?
General
