Osburn 1800 User Manual

/26
3.6 Fan Operation
1. Allow the insert to reach operating temperature (approximately one hour), before turning on the
fan, since increased airflow from the fan will remove heat and affect the start-up combustion
efficiency.
NOTE: ENSURE THE FAN CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE INSERT TO PREVENT
ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN CORD BENEATH THE INSERT.
2. Turn the fan on or off with the variable speed control located on the left side of the fan assembly
below the bottom louvre. The switch settings are Off, High and adjustable down to Low.

Osburn 1800 Specifications

General

Brand	Osburn
Model	1800
Category	Wood stove
Language	English