Ouellet SED18KCH16S User Manual

●
●
●
●
●
●
Function introduction for combination buttons
Energy-saving function
Under cooling mode, press "TEMP" and " CLOCK" buttons simultaneously to
start up or turn off energy-saving function. When energy-saving function is started
up, "SE" will be shown on remote controller, and air conditioner will adjust the set
temperature automatically according to ex-factory setting to reach to the best
energy-saving effect. Press "TEMP" and "CLOCK" buttons simultaneously again to
exit energy-saving function.
Note:
Under energy-saving function, fan speed is defaulted at auto speed and it can’t
be adjusted.
Under energy-saving function, set temperature can’t be adjusted. Press "TURBO"
button and the remote controller won’t send signal.
Sleep function and energy-saving function can’t operate at the same time. If
energy-saving function has been set under cooling mode, press sleep button will
cancel energy-saving function. If sleep function has been set under cooling
mode, start up the energy-saving function will cancel sleep function.
8
℃
heating function
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start
up or turn off 8
℃
heating function. When this function is started up, " " and "8
℃
"
will be shown on remote controller, and the air conditioner keep the heating status
at 8
℃
. Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8
℃
heating function.
Child lock function
▲
Press "▲" and " " simultaneously to turn on or turn off child lock function. When
child lock function is on, " " icon is displayed on remote controller. If you operate
the remote controller, the " " icon will blink three times without sending signal to
the unit.
Temperature display switchover function
▲
Under OFF status, press " " and "MODE" buttons simultaneously to switch temp-
erature display between
℃
and
℉
.
Note:
● Under 8
℃
heating function, fan speed is defaulted at auto speed and it can’t be
adjusted.
Under 8
℃
heating function, set temperature can’t be adjusted. Press " TURBO "
button and the remote controller won’t send signal.
Sleep function and 8
℃
heating function can’t operate at the same time. If 8
℃
heating function has been set under heating mode, press sleep button will cancel
8
℃
heating function. If sleep function has been set under heating mode, start up
the 8
℃
heating function will cancel sleep function.
Under
℉
temperature display, the remote controller will display 46
℉
heating.
16

Ouellet SED18KCH16S Specifications

General

Brand	Ouellet
Model	SED18KCH16S
Category	Heat Pump
Language	English