EasyManuals Logo
Home>Ouellet>Heat Pump>SED18KCH16S

Ouellet SED18KCH16S User Manual

Ouellet SED18KCH16S
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
MAINTENANCE
CLEANING AND MAINTENANCE
Turn off the unit and disconnect the power before cleaning to avoid electric shock.
Do not wash the unit with water to avoid electric shock.
Do not use volatile liquid to clean the unit.
Cleaning the surface of indoor unit
When the surface of indoor unit is dirty, it is recommended to use a softdry cloth or lightly moistened
with water to wipe it.
Do not use liquid or corrosive detergent clean the appliance and do not splash water or other liquid
onto it, otherwise, it may damage the plastic components, even cause electric shock.
Do not remove the panel when cleaning it.
Clean filter
1. Open panel
Open the panel into a certain angle as illus-
trated (less than 60°, do not force the panel).
3. Clean filter
Use a vacuum or water to clean the filter.
When the filter is very dirty, use water (below 45 °C) to
clean it, and then put it in a shady and cool place to dry.
2. Remove filter
Remove the filter as illustrated.
4. Install filter
Install the filter and then close the panel cover tightly.
The filter should be cleaned every three months. If the unit operates in a highly dusty environment,
cleaning frequency should be increased.
After removing the filter, do not touch fins to avoid injury or damage the unit.
Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard.
WARNING
WARNING
NOTICE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ouellet SED18KCH16S and is the answer not in the manual?

Ouellet SED18KCH16S Specifications

General IconGeneral
BrandOuellet
ModelSED18KCH16S
CategoryHeat Pump
LanguageEnglish

Related product manuals