24
Getting Started
Adjusting the hand strap
Adjust the fastening strength of hand strap as
below.
A Remove (A) from the strap joint and next
remove (B).
B Adjust the position (C).
C Attach (D), then (E) to the joint.
Attach the hand strap fi rmly so that the strap
does not come off.
CAUTION
If the hand strap loosens, the computer may
fall down.
Do not use the strap if it becomes worn or
damaged.
B
ED
A
C
3
Using the hand strap
When using the computer holding with hand,
insert your hand to (A) part of the hand strap.
Fix the hand strap fi rmly so that the computer
does not come off, and then turn it over.
When the hand strap is too loose or too tight,
you can adjust the hand strap according to
the instructions below.
CAUTION
If the hand is not securely fi xed to the hand
strap, the computer may drop.
A
Preparation
U1mk2OIXP7.indb24U1mk2OIXP7.indb24 2010/01/1416:36:232010/01/1416:36:23
To Next Page
Loading...
Need help?
General