Function Settings
Spectrum Analyzer Display
Pattern
Default: Pattern 1
Variety: 6 types _ OFF
E
N
G
L
I
S
H
21
E
N
G
L
I
S
H
22
1 Press [MENU]. 3 Press [SET].
Select
Note:
≥ No settings can be performed while "NO
DISC" appears on the display.
≥ Press [DISP] (display) to return to the
regular mode.
[DISP]
(Display)
[MENU]
2 Press [MENU].
OFF
Pattern 1
Pattern 6
[SET]
Mute/Attenuation
You can select mute or attenuation when [MUTE]
is pressed (page 23).
Default: MUTE
No sound
(Mute)
Decrease 10 steps
(Attenuation)
Security Function
Allows you to activate the anti-theft function when
leaving your car.
Default: ON
Security function is
activated.
Security function is not
activated.
Select
Select
Security Function
When the key in the ignition is turned OFF
≥ Security message will be displayed.
≥ The panel removal alarm will be active.
(page 49)
When the front panel is removed
≥ The security indicator blinks. (page 49)
(Press and hold [MENU]
for more than 2 seconds
on the remote control
unit.)
(Example: Radio mode)
The only items which can be set using [MENU]
on this unit are the Function Settings (Spectrum
Analyzer Display Pattern, Mute/Attenuation and
Security Function).
To Next Page
Loading...
Need help?
General
