Panasonic CS-A9HKD Service Manual

31
12 Operation Control
12.1. Heating Operation
• Heating operation can be set using remote control.
• This operation is applied to warm the room temperature reaches the setting temperature set on the remote control.
• The remote control setting temperature, which takes the reading of intake air temperature sensor, can be adjusted from 16°C to
30°C.
• During heating operation, the compressor will stop running and restart as shown in below figure.
12.1.1. Heating Operation Time Diagram

Panasonic CS-A9HKD Specifications

General

Brand	Panasonic
Model	CS-A9HKD
Category	Air Conditioner
Language	English