Panasonic DC-BGH1 User Manual

- 217 -- 217 -
12. Remote Operations - Connecting to a Smartphone
End Bluetooth Connection
To terminate the Bluetooth connection, turn off the Bluetooth function of the camera.
[MENU/SET] [ ] [ ] [Bluetooth] [Bluetooth] Select [OFF]
●
Even if you terminate the connection, the pairing information for it will not be deleted.
Connecting to a Paired Smartphone
Connect paired smartphones using the following procedure.
Enable the Bluetooth function of the camera.
●
[MENU/SET] [ ] [ ] [Bluetooth] [Bluetooth] [ON]
On the smartphone, start up “LUMIX Sync”.
●
If a message is displayed indicating that the smartphone is searching for cameras, close the message.
Select [ ].
Select [Bluetooth Setup].
Turn Bluetooth ON.
From [Camera registered] items, select the camera’s device name.
●
Even if you set up pairing with more than one smartphone, you can only connect to one smartphone at a time.
●
When pairing takes some time, canceling the pairing settings on both the smartphone and camera and re-establishing
the connection may result in the camera being detected correctly.

Panasonic DC-BGH1 Specifications

General

Type	mirrorless camera body only
Color	black
Image Sensor	nmos
Image Sensor Size	four thirds (17.3 x 13 mm)
Effective Pixels	10.28 megapixels
Digital Zoom	1.6x
Built In Flash	no
Lens Mount	micro four thirds
Shutter Speed	1/16000
White Balance	yes
Autofocus	yes
Eye AF	no
Video Resolution	4k (2160p)
Wireless Connectivity	bluetooth, wifi
Memory Card Slots	2
Memory Card Type	secure digital, secure digital high capacity (sdhc), secure digital extended capacity (sdxc)
Waterproof	no