Panasonic DC-BGH1 User Manual

- 248 -- 248 -
13. Materials - Lamp / Indicator Display
Lamp / Indicator Display
Shows the status of the camera with the lamp/indicator.
■
Status indicator (Green / Orange)
Lights up (Green) The camera is turned on.
Lights up (Orange)
Tether connect mode (
212 / Tether Connection Mode)
Blinks (Green, once/sec.)
(When using PoE+ power supply.)
Determining PoE+. (
22 / Supplying power from a PoE+ power supply)
(When using battery.)
Low battery (It blinks in orange when in Tether connect mode.)
Blinks (Green, 4 times/sec.)
(When using PoE+ power supply.)
Insufficient power supply capacity
(When using battery.)
The camera is turned off forcibly due to low battery. (It blinks in orange when in Tether
connect mode.)
Blinks (alternately green and
orange)
System error (Turn off the camera and then on again.)
Off The camera is turned off.
■
Front tally lamp / Rear tally lamp (Red)
Lights up During video recording. (or sending data to external devices)
Blinks (Red, once/sec.) Low battery and card capacity.
Blinks (Red, 4 times/sec.) Stops recording forcibly due to low battery and card capacity.
■
[NETWORK] connection lamp (Blue)
Lights up
After being connected with a LAN cable.
When Wi-Fi/Bluetooth function is ON or connected.
Blinks When sending Tether recorded images to a PC from a camera.
●
When the power is turned off and [Remote Wakeup] is set to [ON], the [NETWORK] connection lamp turns off even if the
Bluetooth function is working.

Panasonic DC-BGH1 Specifications

General

Type	mirrorless camera body only
Color	black
Image Sensor	nmos
Image Sensor Size	four thirds (17.3 x 13 mm)
Effective Pixels	10.28 megapixels
Digital Zoom	1.6x
Built In Flash	no
Lens Mount	micro four thirds
Shutter Speed	1/16000
White Balance	yes
Autofocus	yes
Eye AF	no
Video Resolution	4k (2160p)
Wireless Connectivity	bluetooth, wifi
Memory Card Slots	2
Memory Card Type	secure digital, secure digital high capacity (sdhc), secure digital extended capacity (sdxc)
Waterproof	no