You can view still pictures and motion
pictures on a TV by connecting the camera to
your TV with the AV cable (optional).
●
Also consult TV operating manual.
Getting Ready:
• Complete the [TV Aspect] setting.
• Turn off both the camera and television.
Connect camera to TV
Turn on TV
●
Set to auxiliary input.
Turn on camera
Press the Playback button
■
When using TVs with an SD card slot
Insert the SD Memory Card into the SD card slot
• Still pictures only can be played back.
• When using SDHC or SDXC Memory Cards, be sure to play each type of card in
equipment compatible with the particular format.
●
Do not use any other cables except a genuine Panasonic AV cable (optional).
●
You can play back pictures on TVs in other countries (regions) which use the NTSC or
PAL system when you set [Video Out] in [Setup] menu.
●
Some televisions may cut off the edges of pictures, or not display them full screen.
●
Pictures rotated to portrait may be blurred slightly.
●
If aspect ratios are incorrect or if the top and bottom of the picture are cut off on
widescreen or high-definition televisions, change the screen mode settings on the TV
side.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
AV cable (optional)
Yellow: To video socket
White: To audio socket
(Make settings before selecting [Print start])
Select item Select setting
Item Settings
[Print with
Date]
[ON]/[OFF]
[Num.of prints] Set number of pictures (up to 999 pictures)
[Paper Size]
(printer takes priority)
[L/3.5”×5”] (89×127 mm)
[2L/5”×7”] (127×178 mm)
[POSTCARD] (100×148 mm)
[16:9] (101.6×180.6 mm)
[A4] (210×297 mm)
[A3] (297×420 mm)
[10×15 cm] (100×150 mm)
[4”×6”] (101.6×152.4 mm)
[8”×10”] (203.2×254 mm)
[LETTER] (216×279.4 mm)
[CARD SIZE] (54×85.6 mm)
[Page Layout]
(printer takes priority) / (1 picture, no border) /
(1 picture, with border) / (2 pictures) / (4 pictures)
●
Items only compatible with the printer may be displayed.
●
To arrange “2 pictures” or “4 pictures” in the same still pictures, set the
number of prints for the still pictures to 2 or 4.
●
To print to paper sizes/layouts not supported by this camera, set to and make
settings on the printer. (Consult your printer’s operating manual.)
●
When setting [Print with Date] to [ON], check the date printing settings on the
printer (printer settings may be prioritised).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
