- 107 -
Playback/Editing
You can recreate the red tinge of the pictures taken underwater.
¢ These pictures are examples to show the effect.
Press 2/1 to select a picture, and then press 3.
• If you have filtered images for playback by using [Slide Show] (P99)
or [Filtering Play]
(P101), the selection screen appears. You can proceed to step
2 by selecting [Retouch] with
3/4, and then pressing [MENU/SET].
• You can also proceed to step 2 by selecting [Retouch] from the [Playback] menu.
Press 3/4 to select [Color Reproduction], and then press [MENU/SET].
Press 3/4 to select the effect, and then press [MENU/SET].
• You can select from three levels of effect.
• If you select [OFF], an image with no effect is displayed. To proceed with the
[Color Reproduction] operation, select another image effect. If you are not going to add any
effect, exit the menu.
• Confirmation screen is displayed. It is executed when [Yes] is selected.
• The effect may be weaker than that of [Color Reproduction] in the [Rec] menu.
• The following pictures cannot be processed:
– Motion pictures
– Pictures taken in [Panorama Shot]
• Picture groups taken with [Time Lapse Shot] cannot be processed on a group-by-group basis.
[Color Reproduction]
To Next Page
Loading...
Need help?
General
