10
Lint filter
After each operation
■If removing the filter is difficult
Turn the tub. (See left.)
■If the filter is broken
Buy a new filter at a dealer.
● Do not wash laundry with the filter removed.
(To prevent damage to clothes)
NOTE
Maintenance
1
Hold the
upper part and
remove.
2
Open the filter
and remove the
lint.
● If removal is difficult,
soak the filter in water
and wash.
3
Attach to the original position.
Cancelling end buzzer
Setting Child Lock
Turning the tub with hand
● If there is water in the tub or “Start” is pressed, the tub
cannot be turned.
NOTE
Convenient
Functions
Pressing down, press.
● To reset, do the same procedure.
● To cancel, do the same procedure.
If the lid is opened during operation with this function
activated, the buzzer continues to beep until the lid is closed.
If the lid is opened for 10 seconds or more, the water is
forcibly drained. (To prevent children from falling in the tub
and drowning)
● This function does not lock the lid and button operations.
● Set the drain hose in the condition where water can be
drained.
● If water is drained forcibly, “U99” is displayed. (P. 15)
1
After Closing the lid,
turn the power on.
2
Press 5 seconds.
When it is difficult to remove the lint filter or add softener
1
Turn the power on.
2
When clicking sound is heard after approx. 15
seconds,
turn the tub.
(Clockwise only)
After releasing your finger
from “ON”, continue to press
this button for 3 seconds.
pi pi
pi pi
pi pi
pi pi
pi pi
pi pi
Click
12
3
4
W9901-8AN00.indd 10W9901-8AN00.indd 10 8/9/12 9:55 AM8/9/12 9:55 AM
To Next Page
Loading...
Need help?
General