– 8 –
Control Panel
Start Pad
One tap allows oven to
begin functioning. If door is
opened or Stop/Reset Pad
is pressed once during oven
operation, Start Pad must
again be pressed to restart
oven.
Beep Sound
When pad is pressed correctly, a beep sound will be heard. If a pad is pressed and no beep is heard, the
unit does not or cannot accept the instruction. The oven will beep twice between programmed stages. At the
end of any complete programme, the oven will beep fi ve times.
NOTE:
If an operation is set and Start Pad is not pressed, after 6 minutes, the oven will automatically cancel the
operation. The display will revert back to clock or colon mode.
Display Window
Micro Power Pad
(pg.11)
Inverter Melt&Soften
Pad (pg.16)
Inverter Turbo
Defrost Pad (pg.12)
Quick Minute Pad
(pg.16)
Sensor Reheat Pad
(pg.15)
Sensor Cook Pad
(pg.14)
Keep Warm Pad
(pg.17)
More Pad
(pg.14)
Less Pad
(pg.14)
Pecipe Store Pad
(pg.17)
Timer Pad
(pg.19)
Stop/Reset Pad
Before cooking: One tap
clears all your instructions.
During cooking: One
tap temporarily stops the
cooking process. Another
tap cancels all your
instructions and colon or
time of day appears in the
Display Window.
Timer/Weight and
Sensor Menu Dial
(pg. 7)
Clock Pad
(pg.10)
F00039Y40QP_OI.indd 8F00039Y40QP_OI.indd 8 2011-7-4 9:48:052011-7-4 9:48:05
To Next Page
Loading...
Need help?
General
