26
English
■ To turn the power ON/OFF with the remote
control
To turn the power on
●
When the power of the unit is on (Power Indicator -
red), press <POWER ON button (
)> then the picture
will be displayed.
●
Power Indicator: Green (Picture is displayed.)
To turn the power off (Standby condition)
●
When the power of the unit is on (Power Indicator -
green), press <STANDBY button (
)>, then the power
will be turned off.
●
Power Indicator: Red (standby)
Note
●
After the power plug is disconnected, the power
indicator may remain lit for a while. This is not a
malfunction.
●
Press the <Power button (
) (Unit)> on the unit to
turn the unit off, when the power of the unit is turned
on or in standby mode.
Selecting the input signal
Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
Unit
Input
HDMI1
HDMI2
PC
USB
ENTER
Move Select
[HDMI1]: HDMI 1 terminal, HDMI input
[HDMI2]: HDMI 2 terminal, HDMI input
[PC]: PC Input Terminal
[USB]: USB terminal, USB input
To Next Page
Loading...
Need help?
General