47
English
Using HDMI-CEC
function
The HDMI-CEC function enables the remote control
of this unit alone to operate the basics of HDMI-CEC
compatible devices by the interlocking control between
this unit and such devices. Also, this function enables
the remote control (or main unit’s buttons) of a HDMI-
CEC compatible device alone to turn on/off this unit and
switch input.
Connection
Connect the HDMI-CEC compatible device to HDMI 1 or
HDMI 2 terminal.
HDMI
HDMI cable (commercially available)
DVD Recorder / DVD Player, Blu-ray Recorder /
Blu-ray Player
Setting
Make the setting on the connected device (HDMI-
CEC compatible device) so this function can
operate.
Set [HDMI-CEC control] to [On]. (see page 36)
Turn on all the devices, and turn this unit off and on.
Then check if images can be seen correctly with
HDMI1 or HDMI2 input.
To Next Page
Loading...
Need help?
General