19
18
USER MANUALPANDORA SMART V3
Updating rmware of the tag
• Download the Pandora BT application (for Android or iOS devices equipped with a Bluetooth 4.0 Low
Energy or higher module).
• Open the mobile app Pandora BT.
• Press and hold the button
of the radio tag until the 10th flash of the SEND indicator, then
release the button.
• Select the found device and select one of the update option: FILE MANAGER – firmware will be
uploaded from the phone storage (only for Android). INTERNET – firmware will be uploaded by an
internet connection.
Light indication of SEND LED
SIGNAL DESCRIPTION
1 ash Arming/disarming
Conrmation of arming
Low battery level (when installing a battery)
2 ash Conrmation of disarming
3 ash Battery is charged (when installing a battery)
Faded (Lights up constantly) Battery is discharged (when installing a battery, when pressing the
button)
Replacing an immobilizer tag battery
When replacing the battery you must carefully follow the following steps:
Carefully open the cover of the tag’s battery compartment (fig.1). Extract discharged battery and
insert a new one keeping in mind the correct polarity (fig.2). Replacing a battery will not cause a loss of
tag code information, as authorization data is stored in the non-volatile memory of the MCU. Carefully
close the cover of the tag’s battery compartment. All elements of construction should be rigidly locked
in places.
If it is so, the tag can be operated as usually.
Open here
g.1
СR 2032
Plus side (+)
+
СR2032
g.2
To Next Page
Loading...
Need help?
General
