15
14
USER MANUALPANDORA SMART V3
2. Turn the key in the ignition lock to the OFF position (the engine should still be running) and take
it out of the lock (skip this step for cars with a Start/Stop button).
3. Leave the car, close the doors.
4. Arm the system - the engine will be stopped. Now the system is ready to perform remote and
automatic engine start.
Automatic starts
The system allows configuring automatic engine start and stop conditions. Automatic starts can be
configured using the internet-service or mobile apps. The following conditions can be specified
for automatic engine starts: schedule, time period, engine temperature, voltage. The engine will be
stopped automatically after specified time or when the engine temperature reaches a specified value.
The engine can be also stopped by a user command.
!
auTomaTic engine sTarTs and sTops by TemperaTure are available only if a TemperaTure sensor is connecTed. remoTe
and auTomaTic engine sTarTs are noT available if The hood is open. afTer Third failed consecuTive aTTempT of auTomaTic
sTarT all subsequenT auTomaTic sTarTs will be cancelled unTil arming/disarming of The car (iT doesn’T affecT aT remoTe
sTarT feaTure).
Slave mode
This mode allows arming and disarming using original vehicle control – an original key, button/sensor
of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle
! This mode is disabled by defaulT for a digiTal proTocol. more informaTion on loader.pandorainfo.com. iT is
recommended To acTivaTe The «prohibiT disarming when a Tag is absenT» To increase securiTy feaTures of The slave
mode.
Owner authorization devices and functions
Authorization devices
Authorization devices are Bluetooth devices paired with the system (radio tags, remote control
D030, mobile phone with the app). The devices are used to recognize an owner in the radio
coverage zone of the base unit to arm/disarm the system (Hands Free mode) and to implement
immobilizer or Anti-Hi-Jack functions.
!
insTall The beeper if you use auThorizaTion devices.
Hands Free mode
This mode is used for automatic arming/disarming
when an owner with an authorization device is
distancing
or approaching a vehicle.
!
This mode is disabled by defaulT. iT is required To make addiTional seTTings using pandora alarm sTudio To use This
mode. quick access commands To manage hands free mode: 223* - acTivaTe hands free arming, 224* - acTivaTe hands
f
ree disarming, 222* - deacTivaTe all hands free.
Immobilizer mode
This mode is used to recognize an owner using authorization devices when the system is disarmed.
When turning on the ignition, the base unit performs a search for authorization devices in the
radiocoverage zone. If there is no any authorization device in the radio coverage zone, the system
will block the engine. Engine blocking will occur immediately or at the time a motion sensor detects
movement, it depends on the system settings. When an authorization device appears in the coverage
zone, the system will exit blocking mode and will continue to work in normal mode.
!
This mode is enabled by defaulT. iT is required To make addiTional connecTions for This mode.
ANTI-HI-JACK-1/2 modes
The Anti-Hi-Jack modes help to prevent aggressive seizure of a vehicle when authorization in case
of disappearance of authorization devices from the radio coverage zone when system is disarmed.
ANTI-HI-JACK-1 mode – The base unit checks if an authorization device is in the radio coverage zone
each time when ignition is on and a door is opened/closed.
ANTI-HI-JACK-2 mode – The base unit constantly checks if an authorization device is in the radio
coverage zone when ignition is on.
To Next Page
Loading...
Need help?
General
