7
6
USER MANUALPANDORA SMART V3
PIN-codes of the system
The «Secret PIN-code»
(is written on the «Owner’s personal card»
The «Service PIN-code»
(default value is 1-1-1-1)
The «Guest PIN-code»
(default value is 1-2-3-4)
The «Immobilizer PIN-code»
(is used for the Validator (pin-to-drive) function)
! iT is recommended ThaT you will wriTe down The changed or creaTed values of all pin-codes. eliminaTe Third-parTy
access To This informaTion
Owner’s personal card
! erase The proTecTive layer carefully. do noT use any sharp objecTs To avoid damaging of hidden informaTion under
The proTecTive layer.
The owner’s personal card contains private information under a
protective layer:
• PIN (the «Secret PIN-code») is a 4-digit number. This code
can be used to disarm the system, to deactivate immobilizer
functions and to activate service mode. It can be also used to
enter programming mode.
• LOGIN is a 10-digit number. This information is used to add
the system to the online service and mobile applications.
• PASS contains 8 characters and can consist of digits, lower
and upper case letters). This information is used to add the
system to the online service and mobile applications.
• Phone number is a phone number of the built-in SIM-card.
CANNOT BE CHANGED
+7-9хх-ххх-хх-хх
1070000000 / Y34aC4vJ
2-2-2-2
LOGIN / PASS
PIN Phone number
System modules layout
External VALET button
(VALET button via CAN)
Button
for the immobilizer PIN
Circuit being blocked
Base unit
Beeper
1
2
3
4
5
6
7
External VALET button
An external VALET button with a three-color status LED indicator is placed
inside a vehicle (see the system modules layout) The button is used for
programing the system, arming/disarming, activating/deactivating
immobilizer mode.
To Next Page
Loading...
Need help?
General
