29
28
USER MANUALPANDORA SMART V3
CONTROL THE SYSTEM
Arming
To arm the system when the ignition is off, use one of the methods described below. The system
will confirm the command with 1 short sound signal 1х
and 1 flash of light signalization
1х
.
Radio tag
A radio tag must be in the Bluetooth coverage area. Shortly press the control button
, on the tag.
Slave mode
Shortly press the «Lock» button on an original remote control or use a sensor/button on a door handle
(for cars with an intelligent access system).
Phone
Call the system number. Wait for the answer. Dial the
1 *
command. To arm the system without siren signals
dial the
1 0 *
.
Online-service
Login to the PANDORA-ON.COM, when the system is online (there is an Internet connection) press the
button on the control panel.
Mobile application Pandora Connect
Open the mobile application. When the system is online (there is an Internet or Bluetooth connection),
press and hold the
button on the control panel until the scale is fully loaded.
doors locking
system arming
SLAVE
HANDS FREE
PANDORA BT
SLAVE
HANDS-FREE
MOBILE APP
1 0
*
1
*
1x /1x
/1x
HandsFree mode
Move with an authorization device away from your vehicle
.
VALET button
Press and hold the VALET button for 3 seconds. The system will be armed in 30 seconds. The LED
indicator is lighting red during the countdown.
!
There is an opTion in The sysTem seTTings ThaT allows To arm The sysTem wiTh disabled sensors (shock/TilT/moTion
and addiTional sensors). The mode can be acTivaTed only by a professional specialisT.
Disarming
To disarm the system, use one of the methods described below. The system will confirm the
command with 2 short sound signals 2х
and 2 flashes of turn indicators 2х
.
Radio tag
Radio tag must be in the Bluetooth coverage area. Shortly press the control button
on the tag.
Slave mode
Shortly press the «Unlock» button on an original remote control or use a sensor/button on a door handle
(for cars with an intelligent access system.
Phone
Call the system number. Wait for the answer. Dial the
0 *
command.
To disarm the system without siren signals dial the
0 *0
command.
doors unlocking
system disarming
SLAVE
HANDS FREE
MOBILE APP
2x /2x
/2x
0 0
*
0
To Next Page
Loading...
Need help?
General
