EasyManuals Logo
Home>Pantum>All in One Printer>M7200FDW Series

Pantum M7200FDW Series User Manual

Pantum M7200FDW Series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed
error, and then load the paper into the tray print-side down.The automatic feeder tray can
be loaded up to 250 pages, 80g/m² paper
4.
Raise the output tray to avoid the printed paper from slipping and falling, or immediately
remove the printed document after the printing is complete.
Note:
If more than 250 pages (80 g/m²) are put inside the auto feed tray at one
time, paper jam or paper feed failure will be led to.
If carrying out single-sided printing, please make sure that the side to be
printed (the blank side) is face down.
It is recommended that you raise the output tray to prevent the paper from
slipping and falling after printing. If you choose not to raise the output tray, we
recommend that you immediately remove the printed paper from the printer.
15

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M7200FDW Series and is the answer not in the manual?

Pantum M7200FDW Series Specifications

General IconGeneral
BrandPantum
ModelM7200FDW Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals