3) Align the manuscript to match the appropriate paper size.
Note:
•
Make sure there is no document in the ADF. If a document is detected in the
ADF, it will be more preferential than that on glass platen.
4)
Close the scanner cover gently.
Note:
•
Rough textured, uneven, oil stained and extremely smooth paper will make
printing effect poor.
•
Please make sure that there is no dust, fluff, etc. on the paper.
•
Paper shall be put on a flat surface and stored under a cool and dry environment.
•
To avoid influencing the definition, please don't open the scanner cover during
scanning with the platen.
If the manuscript does not match with any size marker, please align the
upper-left corner of the manuscript with the arrow.
•
Please put the paper or document on the scanner glass after the glue, ink or
correction fluid are completely dried.
•
To Next Page
Loading...
Need help?
General
