Pantum M7200FDW Series User Manual

3)
Click on "Device" and select WIA Scan,click the “Custom Insert” below.
4)
The prompt window as is shown below, set the scan information.
5)
Click on "Adjust the Scanned Image Quality" on the bottom left corner of the above picture,
the advanced properties interface will pop up, then users can set the scan; After finishing the
settings, click on the "OK" button, then "Scan" button to start scan.
86

Pantum M7200FDW Series Specifications

General

Brand	Pantum
Model	M7200FDW Series
Category	All in One Printer
Language	English