Printed in Canada - 10/2004 DGP848-EP04
Trouble Display
To view the Trouble Display on LCD or LED keypads:
1. Press the [
TRBL] key.
2. For LEDs: Press the Numerical Symbol corresponding to the Group heading to view the specific trouble.
For LCDs: Press the number representing the trouble and use the [S] and [T] keys to view the specific trouble.
To view the Trouble Display on Grafica Keypads:
1. Enter your [
ACCESS CODE].
2. Using the scroll keys, highlight Trouble and then press the center action key (Ok). The trouble(s) will appear by Trouble
Group.
3. If more than one Trouble Group appears, highlight the desired group before pressing the center action key (View) to view
the specific trouble.
For technical support in Canada or the U.S., call 1-800-791-1919 for English or 1-866-912-0600 for French, Monday to Friday
from 8:00 a.m. to 8:00 p.m. EST. For technical support outside Canada and the U.S., call 00-1-450-491-7444, Monday to Friday
from 8:00 a.m. to 8:00 p.m. EST. Please feel free to visit our website at www.paradox.ca.
TROUBLE GROUP [1]: SYSTEM TROUBLE GROUP [2]: COMMUNICATOR
[1] AC Failure [4] Bell Current Limit
[2] Battery Trouble [5] Bell Absent
[3] Aux. Current Limit [6] ROM Check Error
[1] TLM [4] Fail to Com. 3
[2] Fail to Com. 1 [5] Fail to Com. 4
[3] Fail to Com. 2 [6] Fail to Com. PC
TROUBLE GROUP [3]: MODULE TROUBLE TROUBLE GROUP [4]: COMBUS TROUBLES
[1] Module Tamper [5] Printer Trouble
[2] Module ROM Check Error [6] Module AC Failure
[3] Module TLM Trouble [7] Module Battery Failure
[4] Module Fail to Com. [8] Module Supply Output
[1] Missing Keypad [6] General Failure
[2] Missing Module [7] Combus Overload
[8] Combus Com. Error
TROUBLE GROUP [5]: ZONE TAMPER TROUBLE GROUP [6]: ZONE LOW BATTERY
Press the [5] button to display the tampered zone or zones.
Press the [6] button to display the zone(s) assigned to
wireless devices with low batteries.
TROUBLE GROUP [7]: ZONE FAULT TROUBLE GROUP [8]: CLOCK LOSS
Press the [7] button to display the zone(s) experiencing a
communication, a fire loop or CleanMe
TM
trouble.
Press the [8] button to re-program the time.
To Previous Page
Loading...
Need help?
General
