EVO Systems 23
11.0 VDMP3 Plug-In Voice Dialer
The VDMP3 is a voice-assisted module that can be programmed to call up to 8
telephone numbers in the event of an alarm. You can also call the VDMP3 from an
outside line, enabling you to arm or disarm the system as well as activate up to 8 PGMs.
11.1 Calling the VDMP3 (outside line)
Connected to an answering machine:
1. From an outside line, dial the telephone number to which the VDMP3 is
connected.
2. When the line rings, hang up the telephone.
3. Dial the telephone number again within the time limit set by your
installer.
4. When the VDMP3 answers the line, you are prompted to enter your
access code.
5. Options are given to arm/disarm (1) and control features (PGMs) (2).
Not connected to an answering machine:
1. From an outside line, dial the telephone number to which the VDMP3 is
connected.
2. When the VDMP3 answers the line, you are prompted to enter your
access code.
3. Options are given to arm/disarm (1) and control features (PGMs) (2).
11.2 Receiving a Call From the VDMP3 (alarm in system)
When the VDMP3 calls because of an alarm in the system, the option is given to disarm
the system or disconnect (##). If you hang up without disarming or disconnecting, the
VDMP3 calls the next telephone number on its list (see Telephone Numbers in VDMP3
Setup Instructions).
To Next Page
Loading...
Need help?
General
