Paradox PCS250 User Manual

Page 30 Module Supervision
End User SMS Programming
With Master Programming, you can:
• Set which phone numbers (up to 8 with MG/SP/ E-Series or
16 with Digiplex EVO) will receive text messages sent by the
PCS250 to report system events.
• Select from which area the PCS250 will send text messages
(per phone number).
• Select which event groups (alarm, arm/disarm, trouble and
trouble restore) will generate text messages.
End User SMS Programming with Digiplex EVO
1) Enter the control panel [MASTER CODE] then press [0] to
access Master Programming.
2) Press [1] to enter the SMS settings menu.
3) Select which phone number you wish to program ([01] to
[16]).
4) Enter or modify the phone number - up to 32 characters. To
go to the next screen press [
ENTER].
5) Select which partitions are enabled for that SMS number by
enabling options [1] to [8]. Press [
ENTER] to go to the next
screen.
6) To select which events generate an SMS message, enable or
disable options [1] to [4].
7) To save press [
ENTER].
8) After saving or in the main SMS settings menu press [] to
see which SMS numbers ([01] to [16]) are programmed. To
program the SMS number currently displayed, press [
ACC].
End User SMS Programming with MG/SP / E-Series
1) To access Master Programming, press the [] key.
2) Enter [
MASTER CODE].
3) To enter SMS Setup, press [
ARM].
4) Using the [] and []* or [
STAY] keys, select one of the
eight telephone numbers you wish to program and press
[
ENTER].
*With K10LEDV/H or K636 keypads, use [ SLEEP ] for [  ] and
[ STAY ] for [  ].
5) Enter or modify the phone number - up to 32 characters. To
go to the next screen press [
ENTER].
6) Select the SMS Event Call Options you wish to apply to the
telephone number.
7) To save press [
ENTER].
8) Select which areas are assigned to this telephone number.
To save, press [
ENTER].

Paradox PCS250 Specifications

General

Brand	Paradox
Model	PCS250
Category	Cell Phone
Language	English