Parkside PHS 160 C4 User Manual

GB IE
4
Content
Introduction .................................4
Intended Use ................................4
General Description ...................... 5
Scope of delivery .............................. 5
Overview ......................................... 5
Technical Data .............................. 5
Notes on Safety ...........................6
Symbols ........................................... 6
General safety instructions for power
tools ................................................ 6
Additional safety instructions .............. 8
Operation ....................................9
Switching on/off ............................... 9
Attaching/removing sanding sheet ...... 9
How to connect/remove the dust box .. 10
How to connect/remove dust
extraction ....................................... 10
Practical tips .............................. 10
Sanding ......................................... 10
Selection of sanding sheet ................ 10
Cleaning/Maintenance ............... 11
Cleaning ........................................ 11
Maintenance .................................. 11
Storage ......................................11
Waste Disposal/
Environmental Protection ...........11
Guarantee .................................12
Repair Service ............................13
Service-Center ............................ 13
Importer ....................................13
Spare Parts/Accessories .............14
Translation of the original EC
declaration of conformity ............ 73
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a nal inspection. The
functionality of your equipment is therefore
guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specied. Keep this
manual safely and in the event that
the product is passed on, hand over
all documents to the third party.
Intended Use
This device is designed for dry sanding of
wood, metal, plastic, llers and painted
surfaces.
The device is not suitable for commercial
use.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The equipment is designed for use by
adults. Adolescents over the age of 16
may use the device only under supervision.
The manufacturer is not liable for damages
caused by unspecied use or incorrect op-
eration.

Parkside PHS 160 C4 Specifications

General

Brand	Parkside
Model	PHS 160 C4
Category	Sander
Language	English