Parkside PHS 600 B2 - Introduction and Product Details; Intended Use; Features Overview; Package Contents

■ 2
│
GB
│
IE
│
NI
│
CY
PHS 600 B2
ELECTRIC HEDGE TRIMMER
PHS 600 B2
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety in-
structions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The hedge trimmer is designed for trimming and
cutting hedges, ornamental shrubs and bushes in
the home garden. Any other usage of or modifica-
tion to the appliance is deemed to be improper
and carries the risk of serious personal injury.
Not for commercial use.
Features
Bumper
Safety cutter bar
Safety lock-out
Curved handle
On/Off switch
Handle
Power cable
Strain relief
Blade guard
Keyhole
Package contents
1 electric hedge trimmer
1 blade protector
1 set of operating instructions
Technical specifications
Nominal consumption 600W
Nominal voltage 230 V ∼, 50 Hz
(AC)
Cutting motions n
0
2800 rpm
Weight
(incl. accessories) ca. 3.7 kg
Cut length approx. 600 mm
Blade length
(incl. bumper protection) ca. 680 mm
Tooth spacing approx. 24 mm
Branch thickness max. 18 mm
Protection class IPX0
Protection class II /
(double insulation)
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically:
Noise emission value
Sound pressure level: L
PA
= 78 dB (A)
Uncertainty: K
PA
= 3 dB
Sound power level: L
WA
=
101
dB (A)
Uncertainty: K
WA
= 3 dB
Wear ear muffs!
Total vibration value
Main handle: a
h
= 4.5 m/s
2
Uncertainty: K = 1.5 m/s
2
Auxiliary handle: a
h
= 3.3 m/s
2
Uncertainty: K = 1.5 m/s
2