Parkside PNTS 1500 C4 User Manual

10
GB IE CY
4. Installing the accessories:
- Push the vacuum hose (21)
into the suction connection
(10) until it locks in place.
To remove it, press the catch
(21a) and pull the vacuum
- Fit the handle with air control
(18).
- Install the telescopic suction
tube (19). (Press the button on
the telescopic suction pipe to-
wards
and pull out to the
desired length).
- Install the nozzle desired (
24-28).
  Nevervacuumwithoutalter!
Accessories such as the crevice noz-
zle ( 26), upholstery nozzle (
27) or car nozzle ( 28) can be
attached directly onto the handle
with air regulation ( 18).
Operation
Fully unwind the suction hose
( 21) before commencing work.
Switching on/off
Connect the mains plug.
To vacuum dust, plug the electrical
tool onto the mains socket on the
vacuum ( 11).
Only connect electrical appliances with a
maximum power rating of 1400 W.
Switching on the vacuum cleaner
(Permanent operation):
Move the On/Off switch ( 13) to the “I”
position.
Switch on electrical appliance +
vacuum cleaner:
1. Move the On/Off switch
(13) to the position
2. Switch on electrical appliance.
Switching on the electrical appli-
ance automatically switches on the
vacuum cleaner. Once the electrical
appliance has been switched off,
the vacuum cleaner switches off fol-
lowing a time lapse.
Switching off the vacuum cleaner:
Move the On/Off switch ( 13) to the
“0” position.
Airow Control
The airow can be continuously adjusted
by turning the airow controller ( 4).
MIN: minimum airow
MAX: maximum airow
When vacuuming with low-
powered electrical tools (such as
grinders or jigsaws), open the air
regulator on the handle (18). This
increases the suction power. To do
this, push the ring of the air regula-
tor upwards to three possible levels.
Work breaks
If you want to store away the assembled
suction equipment when you take a break,
you can

push the telescopic suction tube (19)
together and insert the suction tube
holder (20) into the accessory holder
(3a) on the motor head (3);

the telescopic suction tube (19) can be
placed in the retaining bracket (29).

Parkside PNTS 1500 C4 Specifications

General

Brand	Parkside
Model	PNTS 1500 C4
Category	Vacuum Cleaner
Language	English