13
GB IE CY
• Beat the dust out of the cloth lter
(
14) and clean it with a paint brush
or hand brush.
• Replace the paper lter bag ( 15)
when full (see “Replacement parts/Ac-
cessories” for reordering)
• Always check the appliance before
use for any obvious faults such as a
defective mains cable, and have these
repaired or replaced.
Filter Cleaning System
If the suction power diminishes, you can
improve the suction power with the help of
the lter cleaning system.
Press the lter cleaning button only
if the uted lter (14) is inserted.
Insert the mains plug of the device.
1. Move the on/off switch (13) to the “I”
position.
2. Turn the air ow control (4) to the MAX
position.
3. Press the lter cleaning button (2)
down with the help of the handle (18)
and hold it down for 3-4 seconds.
4. Repeat the process two more times.
Maintenance
The device is maintenance free.
Storage
1. Wind the mains cable (7) around the
cable holders (30a+b) on the back of
the device.
2. Wind the vacuum hose (21) around the
motor head (3). The two retaining brack-
ets (29) x the vacuum hose in place.
3. Push the telescopic suction tube (19)
together and insert the suction tube
holder (20) into the accessory holder
(3a) on the motor head (3).
4. The accessory holders (8a) on the cas-
tors (8) and the enclosed accessory
bag (17) are used to store the smaller
accessories.
5. Store the appliance in a dry place (recom-
mended ambient temperature 15 - 30°C)
and out of reach of children.
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have nished with
them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
To Next Page
Loading...
Need help?
General
