Parkside PSZ 250 A2 User Manual

6 GB
Warnings and symbols used
The following warnings are used in this user manual, on the packaging and on the rating plate:
Read the user manual.
This product is classified as protection
class I and must be connected to a
protective ground.
Observe all warnings and safety
instructions!
Alternating current/voltage
IP54
The product is shielded against dust and
splashing of water.
Make sure that the steel cable is
properly rolled onto the reel. The space
between coils must be less than the
diameter of the cable itself.
Wear protective gloves!
Wear ear protection!
Set-up as fixed pulley
Wear safety goggles!
Wear a dust mask!
Set-up as block and tackle with 2 rope
hoists and pulley
Wear suitable work boots!
CE mark indicates conformity with
relevant EU directives applicable for this
product.
ELECTRIC ROPE HOIST
 Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal.
Before using the product, please familiarise
yourself with all of the safety information and
instructions for use. Only use the product as
described and for the specified applications.
If you pass the product on to anyone else,
please ensure that you also pass on all the
documentation with it.

Parkside PSZ 250 A2 Specifications

General

Brand	Parkside
Model	PSZ 250 A2
Category	Chain Hoists
Language	English

Summary

Warnings and Symbols

Product Introduction

Welcomes the user and highlights the importance of the instructions for safety, use, and disposal.

Intended Use

Scope of Delivery

Description of Parts

Technical Data

Safety Information

Special Rope Hoist Safety

Before First Use

Assembly

Operation

Cable Winding and Unwinding

Instructions on how to correctly wind and unwind the steel cable using the control switch.

Lifting Loads

Guidance on how to safely attach and lift loads, ensuring proper center of gravity and cable tension.

Length Limit Levers

Explanation of the function of maximum/minimum length levers and their use as emergency stops.

Emergency Off Switch

Details how to activate and deactivate the emergency stop button for immediate shutdown.

Block and Tackle Setup

Instructions for configuring the hoist into a block and tackle system to double lifting capacity.

Cleaning and Care

Maintenance Schedule

Repairs

Storage Instructions

Disposal Guidelines

Warranty Information

Warranty Claim Procedure

EC Declaration of Conformity